Products

Accessories

You are here: Home >> Products >> Accessories

Products Introduction:

LED Dvi Controller

H803TV is an online master controller that transmits data through DVI/HDMI interface 

Products Features:

. Introduction

H803TV is an online master controller that transmits data through DVI/HDMI interface and has the features of high speed transmission and numerous controlled pixels. H803TV can work online or offline, so it can be connected to both various operating systems and the devices with DVI/HDMI interface. It supports dual-monitor mode, multi-monitor extension mode and duplication mode. Using duplication mode when connected to computer.

Auxiliary slave controller is H801RA and H801RB. Auxiliary software is LED studio software.

H803TV can control the following chips: LPD6803, LPD8806, LPD6812, LPD1886; DMX512, HDMX , APA102, DZ2809; UCS6909, UCS6912, UCS1903, UCS1909, UCS1912; WS2801, WS2803, WS2811, WS2812, INK1003; TM1812, TM1809, TM1804, TM1803, TM1829, TM1926, TTA9912; LD1510, LD1512, LD1530, LD1532, SM16716, SM16726, SM16711, LX1003, LX2003, LX2006; BS0901, BS0902, BS0815, LY6620, BS0825; TLS3001, TLS3002;DM413, DM114, DM115, DM13C, DM134, DM135, DM136; MBI6023, MBI6024, MBI5001, MBI5168, MBI5016, MBI5026, MBI5027, 74HC595, 6B595, TB62726, TB62706, ST2221A, ST2221C, XLT5026, ZQL9712, ZQL9712HV, HEF4094, A8012, etc.

Ⅱ. Performance

1. Each H803TV controls maximum 300000 pixels with four network output ports; each port controls maximum 76800 pixels and connects maximum 255 slave controllers.

2. Support DVI video distributor, each section is controlled by a H801TV. The actual control ability depends on DVI device. For instance, a dual-monitor computer can control maximum 2620000 pixels.

3. Support the following resolutions: 1280×1024, 1280×960, 1280×720, 1024×1024, 1024×768, and 800×600.

4. Support all screen refresh frequencies when the resolution is 1024×768 or 800×600, otherwise the frequency must be 60HZ.

5. Each slave controller controls maximum 3412 pixels with one or four output ports and supports arbitrary sculpt of lamp.

6. Use the autorun USB to transmit and control data, which is applied to both 32-bit and 64-bit operating systems.

7. Signal is transmitted according to standard Ethernet protocol and the nominal transmission distance is 100 meters. The transmission distance can reach to 25 kilometers by using photoelectric converter

Ⅲ. Differences with H801TV, H802TV

1. H801TV does not support duplication mode, can not work separately from the software; H803TV supports duplication mode, can work offline and be connected to devices with DVI/HDMI interfaces.

2. H802TV can only control standard screen, the connected slave controller outputs with only one port; H803TV supports arbitrary sculpt and can output with one or four network ports.  

Ⅳ. Operating Instructions

1. After power on, connect computer USB interface to H803TV USB port with USB cable, connect H801TV DVI port to computer DVI or HDMI interface with DVI cable, computer can detect the device automatically. Neither 32-bit operating system nor 64-bit operating system need to be installed with USB driver, because the drivers have been installed when installing the operating system.

2. Set up multiple monitors and resolution. Right-click desktop—“NVIDIA control panel, set up multiple monitors first, select duplication mode, click apply and DVI indicator light will flash. Then, modify resolution, which must be compatible with two monitors. The following image shows the valid resolution of H803TV. The compatible resolution of different computers might be different.

Input Voltage

DC9V

Power Consumption

5W

Control pixels

300000 pixels, a computer controls 2.62 million pixels

Weight

0.8Kg

Working Temperature

-20C°--75C°

Dimension

L183 x W139 x H40

Carton Dimension

L205 x W168 x H69

Accessories

DVI cable, USB cable, DC 9V power supply

Send Inquiry:
Subject : *
Email : *
Name : *
Message : *
Contact Usmin&max