Products

LED Power supply

You are here: Home >> Products >> LED Power supply

Products Introduction:

IP67 LED Driver
IP67 LED Driver
Products Features:
Characteristics
Waterproof level:IP67
The input voltage range :170~264VAC
Small volume ,high efficiency.
Protecting characteristic:over load/short circuit .
100% full load burn- in testing.
Quality assurance : 2 years
Size:190*49*34mm
Specifications                                                 
Model HY-80-12 HY-80-24
Output DC output voltage 12V 24V
Output voltage tolerance ±5% ±5%
Rated output current 6.66A 3.33A
Output current range 0~6.66A 0~3.33A
Output power 80W 80W
Ripple &noise 100mVp-p 150mVp-p
DC adjustable range ±10% ±10%
Setup rise and hold up time 200ms,100ms,30ms.
Input Input voltage range 170264VAC 4763Hz,240370VDC
AC input current 0.9A/230VAC
Efficiency 78% 78%
AC inrush current Cold start current 36A/230V
Leakage current 1mA/240VAC
Protecting characteristic Over load protection 115%~135% rated output power start the over load protection  
Protection mode : Hiccup mode ,auto-recovery
Over-voltage protection 115%~135% 115%-135% cut off the output
auto-recovery
Over- temp protection Rectifier≥85cut off the output ,auto-recovery
Environment Working temperature  -10℃~+60;20%90%RH
(please refer to the Load deduction curve)
Security Withstand voltage Between input and output::1.5KVAC
The input and ground : 1.5KVAC  
The output and ground :0.5KVAC
Insulation resistance Between input and output:
The input and ground, the output and ground: 100M 0hms /500VDC
Others Weight/ Packing 0.55kg/30PCS  
Remark:
1..All parameters at the unspecified condition, should be measured in the 230V input voltage ,at the rated load and 25
2. Ripple and noise voltage is measured at the end of 20MHz Bandwidth of oscilloscope ,12 inch Twisted pair plus 0.1u and 47u
3. Tolerance is the sum of voltage setting error,voltage regulation rate and current regulation rate
Send Inquiry:
Subject : *
Email : *
Name : *
Message : *
Contact Usmin&max